ResMed AirCurve 10 ST BiLevel Machine w/ HumidAir and ClimatelineAir Heated Tube

The AirCurve 10 ST is a BiLevel device offering perfect patient-ventilator synchrony with its incorporated backup rate. The AirCurve 10 ST offers the best solution for patients who need extremely reliable, non-invasive type of ventilation either at home or in-hospital care, and is equipped with all the latest innovative technology features. 

It is an advanced VPAP device which possesses a total of five operational modes with advanced functions and outstanding features. The AirCurve 10ST is stocked with special iVAPS technology, expiratory pressure relief (EPR), automatic start and stop functions, Vsync automatic leak management, ramp function, mask fitting function and other great performance features as well.

Features

VPAP ST

 VPAP ST features the latest and most sophisticated respiratory algorithms in any spontaneous timed machine. The device provides inspiratory positive airway pressure and also has a backup rate to make sure that you get enough breaths per minute, even when you do not breathe spontaneously.

iVAPS

Incorporates iVAPS technology which is a solution for unobtrusive ventilation. iVAPS targets alveolar ventilation for stable gas exchange in respiratory episodes. When necessary, iVAPS initiates a type of secondary pressure which takes advantage of Vsync leak compensation to better create patient-ventilation synchrony.

TiControl

TiControl is a special feature which allows the healthcare expert to set minimum & maximum time limits for the inspiration phase. In the case of patients with more complex respiratory disorders, early or late cycling can easily occur during the pressure support ventilation treatment. Ti Control works by preventing early and or late cycling so that patients can enjoy maximum breathing comfort throughout required therapy.

Climate Control Technology

Throughout therapy, the device will deliver comfortable humidity & temperature levels right at the mask. Climate Control is the inbuilt HumidAir humidifier system and the ClimateLineAir heated tube system. Climate Control is an intelligent feature that is capable of adapting to the temperature and humidity conditions available in the environment where the device is used. Thus, the system will deliver optimal temperature and humidity for the best breathing comfort all throughout the treatment.

HumidAir Humidifier

The new HumidAir heated humidifier is a part of every AirCurve VPAP and the design is smaller than the humidifiers in previous ResMed models. This makes your entire machine smaller and more portable. For patients who don't normally use heated humidification, you still have the option of removing the humidifier from the device entirely, or not filling the water chamber.

EPR

EPR is capable of determining when you are breathing unnaturally, if you have an apnea that lasts for more than ten seconds, EPR will stop functioning, (meaning air pressure will be constant), until your normal breathing cycle resumes.

Pressure Range

Has a pressure range of 3-25 cm H20, which is a wider pressure range than in a standard CPAP device. The VPAP ST is intended for patients with central sleep apnea, who generally need more air pressure than patients with obstructive sleep apnea.

Smart Start/Stop

 When you take your first breath into your mask, SmartStart will automatically turn your machine on, then when you remove your mask SmartStop will automatically shut your device off. This technology not only makes it easier to operate your machine it also helps conserve machine power.

Ramp

The ramp function allows users to artificially suspend the influx of pressure for a specified period of time (between 5 and 45 minutes).

Mask Fitting

A special function that will visually indicate whether your mask has been fitted correctly and is, therefore, providing an effective seal. When your mask is installed, the AirCurve 10 ST will display either a smiling face or a frown face, a smiling face means that your seal is effective while a frown indicates that your seal is defective and your mask fit needs to be corrected.

Includes

• AirCurve 10 ST Bi-Level Fixed Pressure Device with an Integrated Humidifier
• Standard Humidifier Water Chamber
• ClimateLineAir Heated Tube
• AC Power Supply
• 1 Filter
• Travel Carry Bag
• User Manual

Specifications